Infusion giving set with burette

Burette Set/ Measured Volume Set/ Pediatric Infusion Set Components/ Parts/ Accessories

1. protective cap of the closure piercing device  2. closure-piercing device 3. on/off clamp 4 . tubing 5. injection site 6. air inlet with air filter and closure 7. graduated burette 8. shut-off valve 9. drip tube 10. fluid filter 11. tubing 12. flow regulator 13. injection site 14. male conical fitting 15. protective cap of the conical fitting a. Air inlet with air filter is optional; if an air filter exists, a closure is optional. b. Injection site is optional. c. The fluid filter may be positioned at other sites, for example preferably near the patient access. Generally a fluid filter has a nominal pore size of 15 µm.

General Description:
Infusion giving set, with burette, sterile, single use

Technical Specifications:
Sterile IV giving set with graduated chamber (burette) enabling precise volume and slow administration of infusion or injectable medicine.
Tube: plastic (PVC: polyvinyl chloride). Transparent (allowing the detection of air bubbles). Resistant to kinking.
Length is approximately 150cm (overall IV giving set length approximately 170cm). Internal / external diameter is approximately 3mm / 4mm.
Plastic Perforator: plastic (polyacetate).
Hollow device located at the proximal end of the infusion set allowing it to be connected to the infusion bottle or bag. Composed of a tapering tube mounted on a base ensuring a good seal between the set and the infusion bottle or bag.
Fitted with a protecting cap.
Air inlet: plastic (ABS: acrylonitrile butadiene styrene)
Incorporated into the perforator. Fitted with an air filter (bacteriological filter).
Graduated chamber (burette): plastic (PS: polystyrene).
Transparent. Capacity: approximately 100-150ml. Graduations every ml. Connected to the perforator by a tube (approximatey 15cm).
Security gauge:
Automatic shut off valve, to stop the infusion as soon as the pre-set volume has flown away in order to prevent air entering the drop-counting chamber and/or the tube.
Drop-counting chamber:
Located under the graduated chamber. Calibrated 60 drops/ml. Fitted with a 15µ polyamide filter.
Flow regulator: plastic (ABS: acrylonitrile butadiene styrene).
Ensures the flow regularity during the IV administration.
Injection portal: plastic (ABS: acrylonitrile butadiene styrene)+ synthetic rubber.
Allows introducing precise volume of injectable medicines into the infusion flow.
Terminal connection (stopper): plastic (ABS: acrylonitrile butadiene styrene).
With Luer lock connector.
Single use.
Sterile.